SCT Surface Extender Products

Solomon Colors Surface Extender

Characteristics and Technical Data

Basic Use: SGS Concentrated Surface Extender slows surface evaporation to extend finishing time and reduce the surface checking. The surface extender is specifically designed to reduce the evaporation of water, during the finishing of ready mix concrete, whenever conditions such as high temperature, high wind and low humidity exist.

Composition and Materials: SGS Concentrated Surface Extender is a non-staining evaporation control film that decreases the evaporation of water without changing the quality of the concrete surface.

Packaging: SGS Concentrated Surface Extender is packaged in 5 gallon containers. Containers are clearly marked with complete installation and mixing instructions.

Limitations: SGS Concentrated Surface Extender should ONLY be used for placing and finishing concrete. Surface Extender is NOT to be used as a curing compound.

Shelf Life: Unopened containers have a shelf life of approximately one year. Protect from freezing.

Technical Data
Performance Properties: SGS Concentrated Surface Extender is a non-staining monomolecular film designed to retard the evaporation of moisture.
Physical Properties: SGS Concentrated Surface Extender is a water soluble compound having the following physical properties:

	V.O.C.: 0g/1
	Viscosity: 2500cps
	Flash Point: 230 F
	Specific Gravity: 1.3 to 1.7
	Appearance: Transparent Blue